TANK
Tank
Storage Tank
Storage tanks are containers that hold liquids, compressed gases or mediums used for the short- or long-term storage of heat or cold.
Storage tanks can be used to hold materials such as petroleum, waste matter, water, chemicals, and other hazardous materials, all while meeting strict industry standards and regulations.
Procedure of Fabricate Storage Tank
Step 1: Marking & Cutting Material
Step 2: Rolling and Welding
Step 3: Painting
Step 4: Installation
Please contact us to discuss any query!!!
 |
|---|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|---|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Tank-Heat Excharger
A heat exchanger is a system used to transfer heat between two or more fluids. Heat exchangers are used in both cooling and heating processes.
Procedure for Fabricate Heat Exchanger
Step 1: Rolling and welding
Step 2: Fitup nozzle and installation
Step 3: X ray 100% and ultrasonic testing (if needed)
Step 4: Cleaning with acid and painting (if needed)
Please contact us to discuss any query!!!
LPG TANK
LPG tank is made from welded steel and is designed for the required pressures and heat expansion of the stored hydrocarbon gases, including propane and butane. LPG tanks are frequently seen at petrol stations for LPG Autogas storage.LPG is a very safe product when stored and used correctly.
Procedure for Fabricate LPG Tank
STEP 1 : Marking & Cutting
STEP 2 : Rolling & Welding
STEP 3 : Fit up nozzle and installation
STEP 4 : X-RAY 100% and untrasonic testing ( If needed )
STEP 5 : Blasting and painting ( If needed )
Please contact us to discuss any query!!!
 |
|---|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Pressure Vessels
This is a container whose design purpose is to store liquids or gases at a pressure above normal atmospheric pressure. Its fabrication is specific and pays attention to the operating pressure, temperature, safety features, and corrosion tolerance.
They use them to store several products such as petroleum, chlorine, and ammonium.
Procedure of Fabricate Pressure Vessels
STEP 1 : Marking & Cutting
STEP 2 : Rolling & Welding
STEP 3 : Fit up nozzle and installation
STEP 4 : X-RAY 100% and untrasonic testing ( If needed )
STEP 5 : Blasting and painting ( If needed )
Please contact us to discuss any query!!!
CONTACT
Our Location
Lot 5187-B,
Kawasan Perindustrian Balakong Jaya,
43300 Seri Kembangan,
Selangor.
Tel
Tel: 010-815 3393 (Office)
013 - 207 1707 (Yewson)